 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Application: | Injection Mold | Size: | Standard |
|---|---|---|---|
| Standard: | Punch | Type: | Adjusting Type |
| Material: | Steel With Hardness | Shaping Mode: | Die Casting |
| Highlight: | injection molded parts,injection molding tool |
||
punch SCY Injection Molding Tool Oil Free Slide Units ISO9001 Certification
punch Standard Oil-Free Slide Units For Loose Core -Standard/Fixed Type- (Part Numbers)
Features of Oil-free Slide Units for Loose Core
● One side has aclearance of 0.5mm.Thus when you hoto precisely adjust,take the stopper⑤ off and reduce
the clearance in thecurrent state.Alternatively, use astandard type thathas a clearance of0.1mm.
● The unit can be mounted on an ejector plate in two ways :(1)Screwing into the ejector plate, or (2)Screwing into the unit. For (2) use a socket head cap screw that corresponds to BM in the Bolt hole dimensions table. For (1) select a rank below the corresponding BM (i.e., M6 screw when BM is M8).
● Prior to mounting, apply * grease to the unit in order to protect it from wear during initial running-in.
● If the stroke is long, it is recommended that you use a bushing that supports the inclined pin. X P.675
| Item | Components | Parts Name | R | Piece | ||||||||
| ① | Slide base | Slide Base | S55C | 2 | ||||||||
| ② | Inclined pin holder | Inclined Pin | Holder | SCM440 | 1 | |||||||
| ③ | Slide plate | Slide Plate | * CAC304＋Solid lubricant | 2 | ||||||||
| ④ | Parallel Key | Key | S45C | 1 | ||||||||
| ⑤ | Stopper | Stopper | SS400 | 2 | ||||||||
| * High strength brass casting class 4 (Old JIS: HBsC4) | ||||||||||||
| ①Slide Base | ②Inclined pin holder | ③Slide Plate | G | F | Part number | |||||||||||||
| W | L | H | C | D1 | d | d1 | h | h1 | h2 | a1 | hC | N | S | a | Type | D | ||
| 44 | 44 | 24 | 3 | 7.5 | 4.5 | 10 | 20 | 12 | 5 | 16 | 2.5 | 12 | 14 | 26 | 12 | 5 | SCY | 8 |
| 50 | 50 | 28 | 3 | 8.5 | 5.5 | 11 | 24 | 14 | 6 | 20 | 3 | 14 | 16 | 32 | 14 | 5 | 10 | |
Contact Person: bearing
