 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Application: | Engine Bearing | Size: | Standard |
|---|---|---|---|
| Standard: | DIN1494 | Material: | Steel+CuSn6Ni9 |
| Type: | X Type | Technical: | Wrapped Bronze |
| Highlight: | bimetal bushing,bimetal bearing bushes |
||
Bronze Alloy Lined Bearings INW-S45C-2 Steel Backed ISO 3547 DIN1494 Standard
INW-S45C Sliding layer can be machined with lubricating grooves and/or with grease indents
Very good corrosion resistance
Steel+CuSn6Ni9
INW-S45C is the Steel backed bronze alloy lined bearing material, the work surface can be produced the oil groove if requested which can improve the oil giving system. Characteristic compare with the traditional steel bushes this structure provides the material have lower friction, excellent wear resistance, higher temp. can bear etc. . Now the bearings have been succeed in the high speed mold & Die industries.
| TY standard | Steel | CU | Max. Load Static | Max. Load Dynamic | Max. Speed | Max. PV | Friction coefficient | Temp. |
|---|---|---|---|---|---|---|---|---|
| TY450 | ≥45hrc | ≥80hb | 50n/mm2 | 30n/mm2 | 2m/s | 1.8n/mm2*m/s | 0.03～+0.20 | -50～+250 |
INW-S45C is the Steel backed bronze alloy lined bearing material, the work surface can be produced the oil groove if requested which can improve the oil giving system. Characteristic compare with the traditional steel bushes this structure provides the material have lower friction, excellent wear resistance, higher temp. can bear etc. . Now the bearings have been succeed in the high speed mold & Die industries.
| Max. Load | Static | 250N/mm2 |
|---|---|---|
| Dynamic | 100N/mm2 | |
| Max. Speed | Dry | 0.5 m/s |
| Oil | 1.0 m/s | |
| Max. PV | 3.25 N/mm2 * m/s | |
| Hardness | HB > 210 | |
| Temp. | -100 ℃ ∼ +300 ℃ | |
| Friction coefficient | 0.03 ∼ 0.20 | |
| Thermal conductivity | 60W (m*k) -1 | |
| Coefficient of thermal expansion | 19 * 10-6 K-1 | |
| Yield point | 150 N/mm2 | |
Contact Person: bearing
