Spherical Guide Bushing Set For Inclined Pin Strong Type MTGHL (Left Handed) MTGHR(Right Handed)

Spherical Guide Bushing Set For Inclined Pin Strong Type MTGHL (Left handed) MTGHR(Right handed)

 
Sankyo Standard Oil-Free Slide Units For Loose Core -Standard/Fixed Type- (Part Numbers)
 
 

• Inner wheel : Copper Alloy Oilless Type

• Outer wheel: S45C-H( I C45 A 1045)

• The operation temperature is from 0˚C to 170˚C.

Features of Oil-free Slide Units for Loose Core
● Refer to the above table for dimensions of the inclined pin's edge cutout and screw size (PM). The counterbore on the inclined pin holder is made in a size that accommodates for a socket head cap screw with a spring washer.
● The unit can be mounted on an ejector plate in two ways :(1)Screwing into the ejector plate, or (2)Screwing into the unit. For (2) use a socket head cap screw that corresponds to BM in the Bolt hole dimensions table. For (1) select a rank below the corresponding BM (i.e., M6 screw when BM is M8).
● Prior to mounting, apply * grease to the unit in order to protect it from wear during initial running-in.
● If the stroke is long, it is recommended that you use a bushing that supports the inclined pin.